Room heater rod gets damaged again and again? Know the reasons and preventive measures

Room heaters are used in most of the houses to get relief from cold during winter season. This appliance heats the room within a few minutes, but many times the rod of the room heater gets damaged again and again, affecting the efficiency of the heater. If the rod gets damaged again and again, you may have to spend money to get it replaced or repaired again and again. This problem can be prevented with some simple precautions.

Major causes of room heater rod failure and prevention methods

1. Continuous use for a long time

Running a room heater continuously for a long time can put excessive stress on its rod.

• Problem: Due to constant heat generation, the metal wiring of the rod becomes weak.
• rescue:
  • Switch off the heater once the room becomes warm.
  • Give a break of 15-20 minutes after every 2 hours.
  • Select a heater with an auto-cut feature.

2. Not letting the heater cool down

Excessive heating of the heater may cause overheating of the rod.

• Problem: Excessive heat can burn the metal coil of the rod.
• rescue:
  • Switch off the heater every few hours and cool it down.
  • Avoid running the heater at high temperatures.

3. Water getting into the room heater

If water gets into the heater, its rod can get damaged immediately.

• Problem: Water can short circuit the electrical wiring of the rod.
• rescue:
  • Keep the heater in a dry location.
  • Do not use the heater in bathrooms or humid places.
  • Protect from water splash.

4. Voltage Fluctuation

Sudden power fluctuations can also damage the rod of a room heater.

• Problem: Rod burning or fuse due to voltage fluctuations.
• rescue:
  • Use a voltage stabilizer.
  • Buy a low-voltage heater in low-voltage areas.

5. Placing flammable materials near the heater

Keeping flammable materials such as curtains, blankets or plastic materials near a room heater can be dangerous.

• Problem: This may cause the heater to overheat and increase the risk of fire.
• rescue:
  • Always keep the heater in an empty place.
  • Do not keep clothes, blankets or papers near the heater.

6. Not cleaning the heater regularly

Accumulation of dust and dirt affects the rod.

• Problem: Dust accumulation reduces heating efficiency and puts more stress on the rod.
• rescue:
  • Clean the room heater once a week.
  • Switch off the heater and wipe it with a dry cloth.

7. Heater quality and old heater

Old and low quality heaters get damaged quickly.

• Problem: Low quality rods burn quickly.
• rescue:
  • Buy branded and BIS certified heaters.
  • Get heaters with safety features like auto cut and overheat protection.

Things to keep in mind while buying a room heater

Safety tips while using room heater

✅ Use stabilizer.
✅ Use the heater in a dry place.
✅ Keep the room heater out of the reach of children.
✅ Do not keep the heater on for a long time.
✅ Use the heater as per the capacity of the power socket.